D-Link DEM-311GT 1000BASE-SX Mini-GBI SFP Best Price in Kenya

D-Link DEM-311GT 1000BASE-SX Mini-GBI SFP

Shop for D-Link DEM-311GT 1000BASE-SX Mini-GBI SFP in Nairobi, Kenya at Routine Solutions Limited D-LINK dealers.

D-Link’s new line of Gigabit Interface Converters (GBICs) and Small Form-Factor Pluggable (SFPs) transceivers represent an industry leading combination of performance and affordability. The D-Link DEM-311GT is a high performance 850nm multimode SFP/mini-GBIC transceiver that supports full duplex and Gigabit transfer speeds on Multi-Mode fibre for distances of up to 220m/550m on 62.5µm/50µm fibre respectively. The D-Link DEM-311GT GBIC Module features a metal housing to reduce EMI and to increase durability, is hot pluggable and is backed by a standard 2-year product warranty and free technical support.

Key Features

  • Media type: Multimode fibre
  • D-Link 1-port SFP SX MM Fibre Transceiver-Up to 550m
  • Wavelength: 850nm
  • IEEE: 1000BASE-SX
  • Speed: 1000 Mbps Ethernet
  • Form factor: Small Form-Factor Pluggable (SFPs)

 

Technical Specifications:

Product Specifications:

  • Interface Options
  • Connector Type LC
  • Operational Ranges
  • DEM-311GT: -18dBm (maximum)
  • Safety Certifications and Environmental Information
  • Class 1 Laser EN 60825-1
  • Optical Receiver Sensitivity DEM-310GT: -20dBm (maximum)
  • Supply Voltage 3.1 ~ 3.5V
  • Maximum Voltage 6.0V
  • Maximum Current 300mA
  • FDA 21 1040.10 & 1040.11

Physical Specifications

  • Warranty and Support
  • Warranty 2 Year Limited Warranty1
  • Dimensions (W x D x H) 0.53in x 2.22in x 0.41in (13.4mm x 56.4mm x 10.35mm)
  • Support Free Technical Support

D-Link cat 6 utp Ethernet cable in Kenya

D-Link cat 6 utp Ethernet cable | Routine Solutions

Shop for D-Link cat 6 utp Ethernet cable in Nairobi, Kenya at Routine Solutions D-Link dealers

D-Link Ethernet Cables provides an easier and cost-effective way to create a Local Area Network that supports Gigabit Ethernet (1000Base-T) standard. The Ethernet Cables is designed to operate at a bandwidth up to 250 MHz

Cat 6 Pure Cable Specifications and technical details 

  • Category 6 UTP Solid cable Colour: Cool Grey 10C
  • Cat 6 D-link cable Conductor : 23 AWG(0.574 / 0.007mm) Bare Copper
  • Insulation Material : HD-PE
  • Model- Brand : D Link : NCB-C6UGRYR-305
  • Full box cable Length type : 305M ( 1000ft)
  • Specific Heat-resistant : 75ohm

Technical Details

  • Nominal Velocity of Propagation : 69%
  • Operating Temperature : -20℃-60℃(-4℉-140℉)
  • Capacitance : 5.6nF/100m nominal
  • Impedance : 100Ω/15%,1-600MHz
  • Storage Temperature : -20℃-80℃(-4℉-176℉) “

Certifications

  • UL 1581 (Test standard)
  • TIA/EIA-568B.2 (Test standard)
  • “Certified for UL 444 (for Copper conductor)
  • UL 758/ Style 2835 (for Copper, CCA, CCAM & CCS conductors)
  • FCC Part 68.500 or IEC 60603-7-4 (for Modular connector)

 

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch Best Price in Kenya

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch

Shop for 8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch in Nairobi, Kenya at Routine Solutions Limited D-link dealers.

D-Link’s DGS-1100 Series Gigabit Smart Managed Switches provide an affordable solution for businesses of all sizes that require simple network management. The DGS-1100 switches consist of 5, 8, 10, 16, 24 and 26 Gigabit port models with a wide variety of functions and features. The 5 and 8 port models come in compact metal desktop enclosures, while the 10, 16, 24 and 26 port models come in metal enclosures that support either desktop or rack mounting. Four models support 802.3af/at Power over Ethernet (PoE), with a range of PoE power budgets from 64W to 370W. There are also two PoE-powered models, one of which has the ability to pass-through power to one or two PoE devices downstream.

D-Link Green / Power Saving Performance
Compliant with IEEE 802.3az Energy Efficient Ethernet (EEE), these switches consume less energy by cutting down on power consumption when port utilization is low. By deploying EEE devices, users can cut operating costs and reduce necessary cooling equipment, helping small and medium-sized businesses stay within their budgets. The DGS-1100 switches also feature D-Link Green Technology that helps save energy automatically. The switches monitor the link status of every port and reduce power consumption on the interface when there is no link or no network traffic detected.

Easy to Deploy
The DGS-1100 switches support an intuitive client-based utility (D-Link Network Assistant Utility) and a web-based management interface. The client-based utility discovers all D-Link Smart Switches within the same Layer 2 network segment, making initial setup quick and easy. This allows extensive switch configuration and basic administration of discovered devices, including password changes and firmware upgrades. The web-based management interface provides a user-friendly way for network administrators to manage the switch down to the port level. The interface can be accessed from a web browser, allowing the switch to be controlled from any network-connected PC.

Surveillance VLAN and Bandwidth Control

The DGS-1100 switches support Surveillance VLAN for IP surveillance deployments. This gives video traffic a dedicated VLAN and higher priority through the switch, separating surveillance traffic from the rest of the network. This also helps to ensure the quality of the video traffic, sparing businesses the added cost of dedicated surveillance networking hardware. Bandwidth Control can reserve bandwidth on a per port basis for important functions that require larger bandwidth or might have high priority.

PoE Support

The DGS-1100-05PD / 08P / -10MP / -24P / -26MP models support Power over Ethernet, simplifying deployments with IP cameras, VoIP phones, wireless access points (APs), and other standards-compliant powered devices. The DGS-1100-08P, 10MP, -24P and -26MP comply with the 802.3af/at PoE standards, supporting up to 30W on each PoE port, not to exceed the switch’s specific power budget. Using the management interface, an administrator can control various PoE functions, such as remotely rebooting cameras or access points, from anywhere on the network, including over the Internet.

Powered by PoE

5-port DGS-1100-05PD switch requires no local power. It is powered by an upstream 802.3af/at compliant PoE switch or injector through its port 5. The 8-port DGS-1100-08PD switch may also be powered by an upstream 802.3af/at compliant PoE switch or injector, or an optional AC/DC power adapter (provided).

PoE Pass-through

The 5-port DGS-1100-05PD also has the ability to propagate PoE power further downstream to PDs connected to its ports 1 and 2. The amount of power available to PDs is dependent on the PoE source (802.3af or 802.3at) and the PD’s PoE Classification.

Advanced Features

The DGS-1100 Series switches are equipped with advanced security features such as Static MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a MAC whitelist for specific ports, helping administrators limit network access to authorized devices only. Storm Control monitors broadcast, multicast, or unknown unicast traffic and will start blocking or discarding packets which could flood the network when the defined threshold is exceeded. IGMP Snooping is able to reduce the loading of L3 multicast routers and save bandwidth in network throughput.

Easy Troubleshooting

The DGS-1100 Series switches feature Loopback Detection and Cable Diagnostics to help network administrators find and solve network problems quickly and easily. Loopback Detection is used to detect loops created by a specific port and automatically shuts down the affected port. Cable Diagnostics helps network administrators quickly examine the quality of the copper cables, recognize the cable type, and detect cable errors.

Surveillance Features (-10MP and -26MP)

A unique Surveillance Mode user interface for the DGS-1100-10MP and -26MP makes surveillance features more accessible than ever. The choice between Standard and Surveillance modes can be made during switch set up, allowing the user to choose the interface that best suits their requirements. In Surveillance Mode, a network topology map shows which devices are connected to which ports, and ONVIF device support allows the switch to auto detect both D-Link and 3rd party IP cameras and Network Video Recorders (NVRs). The UI also shows details on PoE power utilization, device IP addresses, and provides easy access to troubleshooting tools built into the interface.

The DGS-1100-10MP and -26MP also feature 6 kV surge protection on all PoE ports to help prevent damage to the network caused by power surges and lightning strikes. Faulty electrical cabling, faulty network cabling, and lightning strikes can cause damage to the switch and connected devices. Built-in surge protection of up to 6 kV can limit the damage to the switch from both indoor and outdoor devices and network connections. This increases network reliability, reduces repair costs and removes the need for replacement hardware in the event of an electrical surge or lightning strike.

8-Port (DGS-1100-08P) D-Link Smart Gigabit Ethernet PoE Switch Specification

Hardware VersionRev A (DGS-1100-05, DGS-1100-08, DGS-1100-08
Number of Ports8 x 10/100/1000
Port Standard & FunctionsIEEE 802.3, 802.3u, 802.3ab compliant
IEEE 802.3x Flow Control
IEEE 802.3az EEE compliant
802.3af (DGS-1100-08P/-10MP/-24P/-26MP)
802.3at (DGS-1100-10MP/-24P/-26MP)
Half/Full-duplex operation at 10/100Mbps
Full-duplex operation at 1000Mbps
Auto-Negotiation for each port
Auto MDI/MDIX
Switching Capacity16Gbps
Max. Forwarding Rate11.9 Mpps
MAC Address Table Size8K Entries
Packet Buffer2Mbits
Forwarding ModeStore and Forward

 

D-link 48 Port Cat6A Shielded patch panel Best Price in Kenya

D-link 48 Port Cat6A Shielded patch panel

Shop for D-link 48 Port Cat6A Shielded patch panel in Nairobi, Kenya at Routine Solutions Limited D-link dealers.

D-link 48 Port Cat6A Shielded patch panel specifications and Features:

Features of Cat6A Shielded patch panel:

  • Category 6 performance
  • Top-quality high-performance sockets
  • Adaptable port designation
  • Simple color-coded termination
  • Numbered cable position
  • Individually QA tested

Specifications of Cat6A Shielded patch panel:

  • Width – 19” (483mm)
  • Depth – 34mm
  • Height – 1u (44mm)
  • Socket Labels – 9 x 89mm (6-way blocks)
  • IDC Colour Code – IDC color code to T568B
  • Cable Guide – Two cable tie positions per 6-way block. Optional Cable Management Bar available
  • Sockets – High-performance unshielded vertical jacks
  • Fixing Centres – 467mm
  • Material – Mild Steel Sheet CR4 to BSEN10130-1999 DC01 Plastic Inserts ABS Thermoplastic resin with grade UL94 V0 at 1.5mm flame retardancy
  • Finish – Black powder coat to BS6496
  • IDC Blocks – Industry-standard IDC blocks
  • PCB – Groups of 6 identical circuits on 1.6mm double-sided PTH board
  • Conforms to – TIA-568-C.2 Category 6 specification

 

5‑Port Desktop Gigabit PoE+ Switch (DGS‑1005P) Kenya

5‑Port Desktop Gigabit PoE+ Switch (DGS‑1005P)

Buy 5‑Port Desktop Gigabit PoE+ Switch (DGS‑1005P) in Nairobi Kenya at Routine Solutions Limited.

5‑Port Desktop Gigabit PoE+ Switch (DGS‑1005P) Specifications:

  • 1000Base-T Interface: 1
  • 1000Base-T PoE Interface: 4
  • Operation Humidity: 0%-95% RH
  • Storage Humidity: 0%-95% RH
  • Operating Altitude: 2000m
  • Maximum Power Consumption: 4W (PoE on) 3.08W (PoE off)
  • Packet Buffer Size: 192KB
  • FAN: Fan less
  • Auto MDI/MDIX: Yes
  • Switching Capacity: 10 Gbps
  • Packet Forwarding Rate :           7.44 Mbps
  • Dimension: 100x 98 x 28 mm
  • Weight : 26 kgs
  • Operation Temperature: 0 ~ 40 °C
  • Storage Temperature: -10 – 70 ˚C
  • Power Input: 5V/1.2A
  • Maximum PoE Budget: 60W

 

Shop
Sidebar
0 Wishlist
WhatsApp us